Your current location:Home / News / Industry trends
How to maintain the face recognition thermometer in use
Date：2020-11-03 16:01:42 |Read:3402
Now, due to the outbreak of the epidemic, more and more occasions are installed with face recognition thermometer, and some of them are still used outdoors. It is inevitable that the accuracy rate will be reduced due to dust. Face recognition entrance guard thermometer is generally sealed when leaving the factory, but it is difficult to achieve 100% dust prevention in the process of long-term use.
Dust has a certain impact on the face recognition, temperature measurement and access control all-in-one machine. If dust enters the body, it will deposit on the main board and the screen, which will affect the heat dissipation and normal operation of the equipment. At the same time, the display screen will become blurred due to the precipitation of dust. So, how to avoid the impact of dust on the face recognition access control machine? What maintenance methods are there in the use of face recognition, access control and temperature measurement machine? How to prolong the life of face recognition thermometer?
First of all, to avoid collision, because the face recognition temperature control integrated machine contains a lot of precision glass components and electrical components, these components have poor anti-collision performance, once the body is strongly impacted, it will lead to the damage of the display screen and related electronic components of the face recognition access control integrated machine.
Secondly, face recognition, temperature measurement and access control integrated machine should be used in a dust-free environment as far as possible, because the dust deposition will have a certain impact on the service life of the equipment, so the screen, shell and lead port position should be cleaned regularly when using, and the correct cleaning method should be adopted: dip a little glass cleaner with soft cotton cloth, lens paper or soft cloth, and gently wipe it Remove the dust or dirt from the screen and other places.
Thirdly, it is necessary to clean the memory of the face recognition and access control all-in-one machine regularly, so as not to affect the speed of the device recognition due to the overload of the memory.
Finally, we should pay attention to other problems in the process of using the infrared thermometer. For example, dirt, occlusion, breakage will lead to the decline of test accuracy and failure, but it does not affect face recognition.
Dust has a certain impact on the face recognition, temperature measurement and access control all-in-one machine. If dust enters the body, it will deposit on the main board and the screen, which will affect the heat dissipation and normal operation of the equipment. At the same time, the display screen will become blurred due to the precipitation of dust. So, how to avoid the impact of dust on the face recognition access control machine? What maintenance methods are there in the use of face recognition, access control and temperature measurement machine? How to prolong the life of face recognition thermometer?
First of all, to avoid collision, because the face recognition temperature control integrated machine contains a lot of precision glass components and electrical components, these components have poor anti-collision performance, once the body is strongly impacted, it will lead to the damage of the display screen and related electronic components of the face recognition access control integrated machine.
Secondly, face recognition, temperature measurement and access control integrated machine should be used in a dust-free environment as far as possible, because the dust deposition will have a certain impact on the service life of the equipment, so the screen, shell and lead port position should be cleaned regularly when using, and the correct cleaning method should be adopted: dip a little glass cleaner with soft cotton cloth, lens paper or soft cloth, and gently wipe it Remove the dust or dirt from the screen and other places.
Thirdly, it is necessary to clean the memory of the face recognition and access control all-in-one machine regularly, so as not to affect the speed of the device recognition due to the overload of the memory.
Finally, we should pay attention to other problems in the process of using the infrared thermometer. For example, dirt, occlusion, breakage will lead to the decline of test accuracy and failure, but it does not affect face recognition.
- 【Last article】： How to apply for POS?
- 【Next article】： No more
- About us
- About us
- Contact us
- Industrial layout
- Healthcare
- New Energy
- Payment Terminal
- Kiosk
- Success stories
- Success stories
- News Center
- Company news
- Industry trends
Please enter key words
Share
Copyright © 2020 Shenzhen Sumcco Information Co., Ltd
Website construction：Heyou network
